Create a secure Linux-based wireless access point (articol)

Most consumer-grade commercial WAPs operate in the same simple manner: they create a bridge between a wired (Ethernet) network interface and a wireless one. That's exactly what we'll do too. The WAP part will be handled by the hostapd daemon, so you must pick a wireless interface it supports. Among the supported NICs are those with Prism 2/2.5/3, Atheros ar521x, and Prism GT/Duette/Indigo chipsets; a list is available on the hostapd homepage, along with links for Linux drivers for each chipset. I have an Atheros AR5212-based PCI card installed on my WAP, which works great with the latest stable version of MADWifi drivers and is supported by hostapd. Although any Pentium (or newer) system will work, some PCI wireless cards require PCI 2.2 to operate, so make sure to check your system's motherboard specifications before buying. You will also need an Ethernet interface that's supported by Linux for connecting your WAP to the LAN; most on-board interfaces will work just fine.http://www.linux.com/article.pl?sid=06/07/10/1729226